ANALISIS KEKUATAN STRUKTUR REPAIR SKIN DOUBLER PESAWAT B737-300

Djarot Wahju Santoso

Abstract

Fuselage is a structure of airplane as the location where the passengers and goods as well as to place the wing and other structures. Fuselage gets loading when the aircraft take off, flight maneuvers, landing and when at the ground. One is the pressure loading on the fuselage aircraft cabin. In continuous operation airplane due to cabin pressure damage such as cracks often occur in the fuselage. The use of skin doubler to handle cases mainly crack analysis is needed to see the effect doubler thickness and variations in fastener against the structure strength. In this study doubler skin structure modeling and analysis using software CATIA V5R21. Modeling structures made 4 types of structure to use variations of the number of fastener and three other structures to changes in the thickness of the doubler. The whole model is given tensile load and differential pressure. Use of doubler thicker in the repair structure will lower the stress that occurs at the doubler. The more number of rows of fastener used will decrease the stress on the fastener this happens to tensile load, but not effective enough for the load pressure differential. Modeling the structure is safe against tensile loading and internal pressure.

Keywords

trength o f the structure, Repair, Skin doubler

References

Arumulla, Suresh & Tippa Bhimasankara, 2013, “Analysis o f Rivet Using Finite Element Analysis”, International Journal of Computational Engineering Research,Vol. 2, Issue 4, 2013.

Boeing 737-300, “Structure Repair Manual”, Chapter 51-00-00, 51-20-01, 51-20-06, 51-3001,53-60-5.

D. Cook, Robert, 1981, “Concept and Applications o f Finite Element Analysis’”, John Wiley & Sons.

Iryani, Leni, 2009, “Analysis Of Riveted Joint Using Vlieger/Broek Equation”, Jurnal Tekno Insentif 09, Volume 3 Nomor 1, Juli 2009.

Karthik N&Anil Kumar, 2013, Analysis o f the Fuselage Structure for Multi Site Damage, International Journal of Innovative Research in Science, Engineering and Technology,Vol. 2, Issue 7, July 2013.

M. Santosh Kumar1, 2015, “Analysis o f Double Riveted Single Lap Joint in Laminated FRP Composites Subjected to Transverse Loading”, Journal of Material Science and Mechanical Engineering (JMSME), Volume 2, Number 3; April-June, 2015.

Niu CY, Michael, 1988, “Airframe Structural Design”, Hong Kong Conmilit Press Limited.

Niu CY, Michael, 1997, “Airframe Stress Analysis and Sizing”, Hong Kong Conmilit Press Limited.

Suyogkumar W. Balbudhe dkk, 2013, Stress Analysis Of Various Tipes Of Riveted Lap Joint, International Journal of Mechanical and Robotic Research (IJMERR), Volume 2 No 4, October 2013.

Article Metrics

Abstract view: 149 times
Download     : 72   times

Refbacks

  • There are currently no refbacks.