PENGARUH SUHU PREHEAT DAN VARIASI ARUS PADA HASIL LAS TIG ALUMINIUM PADUAN TERHADAP KEKUATAN TARIK DAN KEKERASAN

Nurfi Ahmadi

Submitted : 2017-08-31, Published : .

Abstract

Aluminium has a good nature; corrosion-resistant, lightweight, and able to be recycled. But the connection with welding aluminum is difficult to do so we need the right way this study aims to determine the characteristics of the results of weld aluminum with large variations in preheat temperature and current. Aluminum Alloy AA 3003 TIG welded with Filler ER 5356, a variation current 110 A, 130 A, 140 A and preheat temperature of 75 degree celcius, 125 degree celcius, 175 degree celcius, then welds tested tensile, hardness, and microstructure. The results showed that the variation o f the current 110 A with a preheat temperature of 175 degree C has the highest tensile strength and hardness.

Keywords

Aluminium Alloy AA 3003, Hardness, Tensile Strength

References

Aljufri, 2008, Pengaruh Variasi Sudut Kampuh Tunggal Dan Kuat Arus Pada Sambungan Logam Aluminium-Mg 5083 Terhadap Kekuatan Tarik Hasil Pengelasan TIG, Universitas Sumatera Utara, Medan.

Fawwaz, 2009, Perlakuan Preheat Dalam Pengendalian Distorsi Pada Pengelasan Swing Arm, Universitas Indonesia

Radaj, D., 1992, Heat Effects o f Welding, Berlin, Springer-Verlag, p. 182.

Riswanda, 2011, Pengaruh Variasi Arus Pada Proses Las TIG dan Variasi Putaran Pada Proses Fsw Terhadap Sifat Mekanik dan Korosi Sambungan Las Tak Sejenis Aluminium Paduan 5083 Dan 6061-T6, Universitas Gadjah Mada.

Setiawan, A, 2013, Perbedaan Kekuatan Tarik Dan Bending Akibat Variasi Arus Las Tungsten Inert Gas (TIG) Pada Pengelasan Austenitic Stainless Steel, Universitas Negeri Malang.

Sirama, 2011, Pengaruh Preheat Terhadap Laju Perambatan Retak Fatik Sambungan Las TIG Pada Pengelasan Aluminium Paduan 6061-T6

Teng, Lin, 1998, Effect o f Welding Conditions on Residual Stresses due to Butt Welds, International Journal o f Pressure Vessels and Piping, Vol. 75, 857-864.

Wardoyo, J.T., Sumiyarso B., 2010, Pengaruh Arus Listrik pada Pengelasan Paduan Aluminium 6006-1, Teknik Mesin Polines, Rekayasa Mesin.

http://dx.doi.org/10.28989/angkasa.v8i1.141

Article Metrics

Abstract view: 842 times
Download     : 648   times

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Refbacks

  • There are currently no refbacks.