Henny Pratiwi


The development of high-performance engineering products made from natural resources is increasing worldwide. Kenaf plants have been extensively exploited over the past few years. Chemical treatment is considered to modify the fiber surface properties. In this study, kenaf bast fibers were treated with various concentrations of NaOH with different immersed time, immersed temperature, and dried temperature. Fiber bundle tensile were performed to evaluate the effect of treatments on the fiber tensile strength. Taguchi Methods are used in order to obtain the optimal parameter which could affect the tensile strength of kenaf fibers. Three-Level Orthogonal array is used to design the experiment. Finally, the experimental results will be evaluated using analysis of variance (ANOVA). The analysis of variance (ANOVA) shows that the most significant alkali parameter is NaOH concentration, which accounts for 40.19 percent of the total. It is also found that the optimum treatment is kenaf immersed in 3 wt. percent NaOH solution for 1 hour at 33 degrees celcius and dried at 60 degrees celcius which is supported by the Fourier Transform Infrared Spectroscopy.


kenaf, alkali treatment, Taguchi Method, optimization, fourier transform infrared spectroscopy

Full Text:



Abe, K & Ozaki, Y 1998, Comparison o f useful terrestrial and aquatic plant species for removal o f nitrogen and phosphorus from domestic wastewater, Soil Science Plant Nutrition, vol. 44, pp. 599-607.

Aziz, SH & Ansell, MP, 2003, The effect o f alkalization and fiber alignment on mechanical and thermal properties o f kenaf and hemp bast fiber composites: part I - polyester resin matrix, Composites Science and Technology, vol. 65, pp. 525-35.

Ciolacu D, Ciolacu F, Popa VI, 2011, Amorphous cellulose - structure and characterization, Cellulose Chemistry and Technology, 45(1-2):13-21.

Karnani, R.; Krishnan, M.; Narayan, R., 1997, Biofiber-Reinforced Polypropylene Composites, Polymer Engineering and Science, 37(2), pp. 476-483.

Magurno, A, 1999, Vegetable fibers in automotive interior components, Angewandte Makromolekulare Chemie, vol. 272, pp. 99-107.

Mohanty, AK, Misra, M & Hinrichsen, G, 2000, Biofibers, biodegradable polymers and biocomposites: an overview, Macromolecular Materials and Engineering, vol. 276, no. 277, pp. 1-24.

Ramaswamy, GN, Craft, S & Wartelle, L, 1995, Uniformity and softness of kenaf fibers for textile products, Textile Research Journal, vol. 65, pp. 765-70.

Ramaswamy, GN, Sellers, T, Tao, W & Crook, LG, 2003, Kenaf nonwovens as substrates for laminations, Industrial Crops and Products, vol. 17, pp. 1-8.

Rowell, RM, Sanadi, A, Jacobson, R & Caulfield, D, 1999, Properties of kenaf polypropylene composites, Kenaf Properties, Processing and Products; Ag & Bio Engineering: Mississipi State University, pp. 381-392.

Seller, T & Reichert, NA, 1999, Kenaf properties, processing, and products, Mississipi State University, Mississipi.

Sosiati, H, Ar Rohim, Ma’arif, Triyana, K & Harsojo, 2013, Relationships between tensile strength, morphology, and cristallinity of treated kenaf bast fiber, Proceedings of the Padjadjaran International Physics Symposium 2013, Physics Department, Faculty of Mathematics and Natural Sciences.

Taguchi, G, 1992, Taguchi on robust technology development, bringing quality engineering upstream, ASME Press, New York.

Article Metrics

Abstract view : 31 times
PDF - 15 times


  • There are currently no refbacks.

Copyright (c) 2017 Angkasa

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Angkasa,  P-ISSN 2085-9503 and E-ISSN 2581-1355