Komunikasi Device-to-Device pada Jaringan Seluler 5G menggunakan mmWave

Rasheed Abdurrahman Mulyadi, Uke Kurniawan Usman

Submitted : 2020-01-23, Published : 2020-02-04.

Abstract

This article discusses about device-to-device communication on 5G cellular networks using mmWave. Device-to-device communication will support 5G cellular technology, because it can be a solution to overcome the limitations of cellular coverage and service capacity. D2D can be used in a variety of applications. The main problem in D2D is that interference between signals in one cell will be very vulnerable to occur, so that effective resource management is needed. In addition, the use of D2D will also increase the complexity of a cellular system, in terms of resource management, interference, and also the routing required. Several studies have been carried out to create D2D communication that can be implemented effectively on 5G. One of them is research to perfect the load balancing scheme which is one of the functions obtained from D2D communication. Load balancing is the distribution of cellular traffic loads, using D2D the traffic load is channeled to communication between devices and reduces the burden on the main network.

Keywords

Device-to-device, D2D, Load Balancing, 5G

Full Text:

PDF

References

European Telecommunications Standards Institute (ETSI). (2020, January 26). 4th Generation (LTE). European Telecommunications Standards Institute. Diakses dari https://www.etsi.org/technologies/mobile/4g.

European Telecommunications Standards Institute. (2020, January 26). 5G. European Telecommunications Standards Institute. Diakses dari https://www.etsi.org/technologies/mobile/5g.

Al-Falahy, N., & Alani, O. Y. (2019). Millimetre wave frequency band as a candidate spectrum for 5G network architecture: a survey. Physical Communication, 32, 120-144.

Molu, M. M., Xiao, P., Khalily, M., Cumanan, K., Zhang, L., & Tafazolli, R. (2017). Low-complexity and robust hybrid beamforming design for multi-antenna communication systems. IEEE Transactions on Wireless Communications, 17(3), 1445-1459.

Turkmen, A., Mollel, M. S., Ozturk, M., Yao, S., Zhang, L., Ghannam, R., & Imran, M. A. (2019, August). Coverage Analysis for Indoor-Outdoor Coexistence for Millimetre-Wave Communication. In 2019 UK/China Emerging Technologies (UCET) (pp. 1-4). IEEE.

GC, D., Ladas, A., & Politis, C. (2019). Robust Device-to-Device 5G cellular communication in the post-disaster scenario. In 2019 16th IEEE Annual Consumer Communications & Networking Conference (CCNC).

Tehrani, M. N., Uysal, M., & Yanikomeroglu, H. (2014). Device-to-device communication in 5G cellular networks: challenges, solutions, and future directions. IEEE Communications Magazine, 52(5), 86-92.

Zhang, H., Song, L., & Zhang, Y. J. (2018). Load balancing for 5G ultra-dense networks using device-to-device communications. IEEE Transactions on Wireless Communications, 17(6), 4039-4050.

Huynh, D. T., Wang, X., Duong, T. Q., Vo, N. S., & Chen, M. (2018). Social-aware energy efficiency optimization for device-to-device communications in 5G networks. Computer Communications, 120, 102-111.

Article Metrics

Abstract view: 853 times
Download     : 464   times

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Refbacks

  • There are currently no refbacks.