Kursi Roda Elektrik dengan Kendali Gestur Kepala

Abstract

A wheelchair is a tool that can be used to mobilize patients who experience paralysis, especially paralysis in the legs, so they can move from one place to another independently. An electric wheelchair is a type of wheelchair that can be controlled by a patient without having to be controlled by another person. The design of this tool utilizes an ADXL335 accelerometer sensor mounted on the patient's head as a determinant of the direction of wheelchair movement, BTS7960 as a DC motor driver, a motor wiper as the main drive for a wheelchair, and the Atmega328P microcontroller as an input and output processor. Gestures of the patient's head (looking down, looking up, head tilted to the right, tilting left) will produce a different voltage output which will be processed by Atmega328P as a determinant of the direction of motion which will be sent to the BTS790 driver to drive the wiper motor as the main driver of the wheelchair. The method of testing and measurement carried out by testing the response of the ADXL335 accelerometer sensor, with the test results of the ADXL335 accelerometer sensor having an accuracy of determining the direction of motion of 100%. The results of head gesture control testing the average wheelchair speed of 2.3 km / hour with a patient weight of 40-60 kg, and the test results of battery endurance in a wheelchair of 5.07 hours with a patient weight of 40-70 kg with a 12V18Ah battery.

Keywords

wheelchair, ADXL335 accelerometer, BTS7960 driver, head gesture control

Full Text:

PDF

References

Abrianto, D. A., Setiawan, I., & Hidayatno, A. (2012). Kontrol Kursi Roda Cerdas menggunakan pergerakan kepala. (Doctoral dissertation, Diponegoro University).

Pratama, M. R. K., Tolle, H., & Ananta, M. T. (2018). Pengembangan Aplikasi Kontrol Kendali Kemudi Kursi Roda Berbasis Pergerakan Kepala HEMOCS (Head Movement Control System). Jurnal Pengembangan Teknologi Informasi dan Ilmu Komputer e-ISSN, 2548, 964X.

Mudarris, M., & Zain, S. G. (2020). Implementasi Sensor Inertial Meansurenment Unit (IMU) untuk Monitoring Perilaku Roket. AVITEC, 2(1), 55-64.

Wicaksono, M. A. R., Kurniawan, F., & Lasmadi, L. (2020). Kalman Filter untuk Mengurangi Derau Sensor Accelerometer pada IMU Guna Estimasi Jarak. AVITEC, 2(2), 145-160.

Hariyahya, D., & Fadlillah, U. (2017). Prototype Kursi Roda Dengan Penggerak Roda Omnidirectional Berbasis Arduino. (Doctoral dissertation, Universitas Muhammadiyah Surakarta).

Mardianto, E. (2009). Kontrol Gerakan Kursi Roda Berdasarkan Arah Pandang Mata, pp 1-9.

Tolle, H., & Arai, K. (2016). Design of head movement controller system (HEMOCS) for control mobile application through head pose movement detection. International Journal of Interactive Mobile Technologies (iJIM), 10(3), 24-28.

Safii, I., Tolle, E. H., & Kharisma, A. (2016). Pengembangan Metode Pendeteksian Pergerakan Kepala Berbasis Sensor Internal Pada Perangkat Bergerak Berbasis iOS. Universitas Brawijaya. Malang.

Mondal, R., Mukhopadhyay, A., & Basak, D. (2013). Embedded system of DC motor closed loop speed control based on 8051 microcontroller. Procedia Technology, 10, 840-848.

Jonathan, N., & Rippun, F. (2016). Implementasi Filter Kalman Pada Sistem Sensor Inertial Measurement Unit (IMU) Quadcopter. Jurnal Elektro Unika Atma Jaya, 9(2), 99-110.

Suryanti, D. I. (2017). Inertial Measurement Unit (IMU) Pada Sistem Pengendali Satelit. Media Dirgantara, 12(2).

Ahmad, H. N. (2012). Pemanfaatan RFID (Radio Frequency Identification) Untuk Keamanan Pintu Lemari Berbasis Mikrokontroler ATmega328. Jurnal Teknologi Informasi dan Komunikasi, 2(1), 320568.

http://dx.doi.org/10.28989/avitec.v3i1.830

Article Metrics

Abstract view: 398 times
Download     : 329   times

This work is licensed under a Creative Commons Attribution 4.0 International License.

Tweet

Refbacks

• There are currently no refbacks.